commissions and bespoke
This page shows examples of commissioned and bespoke items. This is a mixture of designs put forward by customers and our own designs, developed from customer briefs and ideas. Please feel free to contact Saxon at the workshop if there is a project you would like to discuss. |
 |
trestle tables
plank top trestle tables with fabricated iron trestles sizes up to 2 metres using two trestles, longer tables can be made with three trestles, choice of 35mm thick timber top or thinner floorboard type tops
|
|
 |
shop counter
This counter was made to commission for a restaurant fit out. Till points were to be fitted to the main work surface, hidden from view on the customer side. A thin shelf is fitted at the front on the customer side for card terminals and menus. The counter is a welded angle steel frame with reclaimed timber panelling and work tops/shelves.
|
|
 |
two tier coffe table on wheels
This coffee table was made to commission for shop fit. angle steel frame on steel wheels with reclaimed timber plank tops
|
|
 |
customised luggage
These vintage suitcases had their lids lined with old maps as part of a restaurant fit out. They were displayed at high level on old train luggage racks
|
|
 |
large shelving unit with angled top shelves
These large shelves were one of several units made to commission for a shop fit. The top two shelves are set at a 30 degree angle with a raised lip at the front to enable stock to be displayed at height.
|
|
 |
school type benches
These benches were made for a retail project to provide a second layer of display when used with our reclaimed mill tables, size shown 180cm x 35cm x 45cm high.These can be made to different sizes.
|
|
 |
Horace stools with backs
A version of the Horace stool with a back rest. 30mm angle frame, reclaimed timber seat and back, size shown 380mm deep x 350mm wide x 750mm seat height
|
|
 |
mill tables
two tier tables made for a multi store shop fit. Reclaimed timber with slatted lower shelf, a manufacturers name has been added using a vintage stencil to add graphic interest, size shown 1800mm x 750mm x 800mm high. These can be made to size spec.
|
|
 |
sink table
A two tier table was made to support this vintage fishmongers sink, brass taps were added to complete the look. A commission for retail display use
|
|
 |
meet and greet table
A 'meet and greet' table made for a restaurant situated in a former theatre. The lettering and paint splatters were added to tie the table to its surroundings
|
|
 |
bespoke Horace bar stools
powdercoated frames matched to a RAL paint code, gloss painted over sized seats. The bottom of the legs have been clear lacquered to give the impression that the stools have been 'dipped' in paint. An image of stools can be seen on the commercial page at Gails Bakery in Wardour St.
|
|
 |
Long French style table and bench
French provincial style table with angled stretchers, bench to match.
Reclaimed timber with tapered square legs, size shown 400cm x 80cm
|
|
 |
wooden style
two of these styles were made for a recent window campaign. reclaimed elm wall studs and weathered board were used. the timber was sealed with a flat matt varnish
|
|
 |
Victorian mangle table
A two tier table was made to support this table top mangle for a recent shop fit. The inspiration for the brief was the English country house kitchen/servant wing. The mangle was locked into position to make it safe for shop floor use.
|
|
 |
steel and timber shelves
Made to size spec these shelves were used in a recent shop fit, polished angle steel frame with reclaimed floorboard shelves
|
|
 |
console type workbench
This workbench was made for a restaurant to sit in a wide alcove, made from reclaimed timber with copies of original factory component labels for each drawer. The drawers were false fronts rather than functional as this was primarily a decorative item.
|
|
 |
small two tier table
This compact table was made as a meet and greet table for a restaurant with a small lobby area. made from reclaimed timber it was based on an original factory table previously bought by the same customer for a similar space, size shown 450mm x 450mm x 900mm.
|
|
 |
all steel workbench style table
Based on steel top engineering tables , our version uses angle and flat steel to creat uprights with angle steel stretcher for extra support. The top is 3mm plate steel. These can supplied clear lacquered, powdercoated or handpainted and rubbed back for a distressed look
|
|
 |
freight trolley tables
An order for 40 of these quickly used our stock of original flat bed trolleys, these were made using original iron wheels and reclaimed timber, the numbering on the sides was made using old factory stencils, size shown 1200mm x 750mm x 350mm high
|
|
|
|
|
